Origin	China
Model Number	SS616
Brand Name	Baiyun
color	black,grey,white.

DESCRIPTION

SS616 Insulating Glass Silicone Sealant is a neutral curing silicone sealant with high modulus and high strength, purposely designed for glazing insulating glass. It has the advantage of low air permeability. SS616 Insulating Glass Silicone Sealant works with two-component sealant gun and the two components react quickly after mingled in scale, then cures to elastomer.

.

CHARACTERISTICS

�   SS616 belongs to RTV-2. The curing speed can be adjustable, and the deep-seated curing speed is fast, and it is suitable to be used in the factory;

�   Neutral curing, non-corrosive to metal, coated glass, concrete, marble, granite etc.

�   High modulus and high strength;

�   Release low-molecular-weight alcohol and no unpleasant odor during cure;

�   Excellent resistance to weather, UV, ozone, water;

�   Excellent resistance to low and high temperature change. No fragility , rigidification or crack at -50��/span>, and no softening, degradation at 150��/span> when cured. It always keeps good elasticity;

�   Good compatibility with other neutral silicone sealants.

APPLICATIONS

�   As a secondary edge adhesive sealant in insulating glass units.

TYPICAL PROPERTIES

APPLICABLE STANDARDS

SS616 Insulating Glass Silicone Sealant meets or exceeds the requirements of the following specifications for one-part sealants.

ASTM Specifications:

�   C920; Type S, Grade NS, Class 20, Use NT, A, G, O

COLORS

SS616 Insulating Glass Silicone Sealant is available in black.

PACKAGING

SS616 Insulating Glass Silicone Sealant is available as a“kit” consisting of a 55-gallon drum of Base and a 5-gallon pail of curing agent (catalyst). Both the drum and the pail are straightsided for use in commercially available pumping equipment.

Base: BAIYUN SS616 Base is available in 41.6 gallon drum (containing ~50 US gallons (189 L)) with a polyethylene bag liner.

Catalyst: BAIYUN SS616 Curing Agent is available in a 4.18-gallon pail (containing ~5.02 US gallons (19 L)).

LIMITATIONS

SS616 Insulating Glass Silicone Sealant should not be used, applied or is not recommended:

�   In structural glazing applications unless Guangzhou Baiyun Chemical Industry CO., LTD. has reviewed shop drawings for applicability and has performed adhesion and compatibility tests on project substrates, spacer materials and all accompanying accessories. Review and testing is done on a project-by-project basis. No blanket approval is given by Guangzhou Baiyun Chemical Industry CO., LTD. for structural glazing applications. Structural glazing industry guidelines (ASTM C1401) suggest that drawings and details are to be reviewed by all parties involved in the manufacture of an SSG system and for each building project.

�   To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes

�   When surface temperatures below 4ºC (39.2ºF) or exceed 40ºC (104ºF)

�   Where painting of the sealant is required, as the paint film may crack and peel

�   In below-grade applications

�   For use as an interior penetration fire stop sealing system

�   In horizontal floor joints where abrasion and physical abuse are likely to be encountered

�   To frost-laden or damp surfaces

�   For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)

�   For contact with strong acids or bases

�   To surfaces in contact with food

�   For continuous immersion in water

�   For water immersion applications.

Do not apply acid-curing (Acetoxy) silicone sealants to this product as this may cause loss of adhesion of SS616 Insulating Glass Silicone Sealant to glass, and/or other substrates used in the system.

TECHNICAL SERVICES

Complete technical information and literature are available from Guangzhou Baiyun Chemical Industry CO., LTD.

The following materials are required to be submitted to Guangzhou Baiyun Chemical Industry CO., LTD. to receive suggestions for the use of SS616 Insulating Glass Silicone Sealant.

�   Architectural and shop drawings for review and comment.

�   Design wind load requirement(s) for project.

�   Glass or panel sizes.

�   Production samples of metal, glass, gaskets, spacers and setting blocks with type and manufacturer identified.

�   Specification and/or identification of paint or finish to which SS616 Insulating Glass Silicone Sealant is intended to adhere (i.e., 215-R1 anodized or if paint; manufacturer, finish system and ID#).

Guangzhou Baiyun Chemical Industry CO., LTD. will provide the following, after reviewing the materials above:

�   Determination as to whether the submitted joint dimensions meet the minimum design criteria necessary for the use of SS616 Insulating Glass Silicone Sealant.

�   Short-term adhesion data using (typically) the ASTM C794 and/or ASTM C1135 test method. Other test methods may be employed.

�   Short-term compatibility test results on gaskets, spacers and setting blocks and other accessories per ASTM C1087 or Guangzhou Baiyun Chemical Industry CO., LTD. test method for compatibility.

�   Information regarding suggested primers, when required.

Guangzhou Baiyun Chemical Industry CO., LTD. will not:

�   Design sealant joints.

�   Provide comments on the structural integrity of overall framing system(s).

�   Provide long-term performance data.

The design professional has final responsibility for the determination of structural sealant joint dimensions based on project conditions, design wind load(s), glass or panel sizes, anticipated thermal, seismic or other movement of the system.

The ASTM C1401 Standard Guide for Structural Sealant Glazing provides a thorough overview of design topics and information for use in SSG systems.