Origin	China
Model Number	SS611
Brand Name	Bbaiyun
color	black, gray, white.

DESCRIPTION

SS611 Silicone Weather-Proofing Sealant is a one-component neutral curing silicone sealant with excellent adhesion, weatherability and elasticity for weathersealing in curtainwall and building facades. It easily extrudes in any weather and quickly cures at room temperature by reaction with moisture in the air to form a durable, flexible silicone rubber seal.

CHARACTERISTICS

  Extension/compression movement capability of up to ±25% of the original joint width

  Odorless, non-corrosive cure system

  Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes

  Remains flexible over a temperature range of -55°F (-48°C) to 250°F (121°C)

  Excellent unprimed adhesion to wide range of substrates including coated, enameled and reflective glasses, anodized and polyester coated or painted aluminum profiles including most fluoropolymerbased paints

  Good compatibility with other neutral silicone sealants

APPLICATIONS

  Weather sealing in glass curtainwall joints;

  Weather sealing in metal, enamel curtainwall joints;

  Sealing in expansion joints for concrete, plastic and metal etc.;

  Sealing in roof joints;

  Many other uses.

TYPICAL PROPERTIES

APPLICABLE STANDARDS

SS611 Silicone Weather-Proofing Sealant meets or exceeds the requirements of the following specifications for one-part sealants.

ASTM Specifications:

 C920; Type S, Grade NS, Class 25, Use NT, A, G, M, O

COLORS

SS611 Silicone Weather-Proofing Sealant is available in black, gray, white or other colors on request.

PACKAGING

SS611 Silicone Weather-Proofing Sealant is available in 10.1 fl. oz. (300 ml) plastic caulking cartridges and 20 fl. oz. (590 ml) foil sausage packs.

LIMITATIONS

SS611 Silicone Weather-Proofing Sealant should not be used, applied or is not recommended:

  In structural glazing applications or where the sealant is intended as an adhesive.

 In areas where abrasion and physical abuse are encountered.

  In totally confined spaces as the sealant requires atmospheric moisture for cure.

 On frost-laden or damp surfaces

  To building materials that bleed oils, plasticizers or solvents – materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets or tapes.

 In below-grade applications

  On substrates made of polypropylene, polyethylene, polycarbonate and polytetrafluoroethylene.

  Where movement capability greater than ±25% is required.

  Where painting of the sealant is required, as the paint film may crack and peel  For structural adhesion on bare metals or surfaces subject to corrosion (i.e., mill aluminum, bare steel, etc.)

  To surfaces in contact with food

     For use underwater or in other applications where the product will be in continuous contact with water.